B2 Audio 6 input 10 output Channel DSP Bluetooth with IOS/Android App 96 KHz - 32 Bit
Technical Specifications
- Inputs: 6 (3 Left/3 Right)
- Connectors: RCA
- Input Level Max: 4.00 Vrms (+ 14dBu)
- Outputs: 10
- Output Max Level: 3.50 Vrms (+ 13dBu)
- Frequency Response: 10Hz to 24KHz (-1dB)
- THD+N: <0.01%
- Signal Latency: <0.6 ms
- Bit Rate: 32-Bit
- Sampling Frequency: 96khz
- Voltage DC: 9.5 - 15v DC
- Maximum consumption: 350mA
Processing Technical Documents
Channel Routing:
- Routing Option: A/B/C/D/A+B/A+C/B+C
Gain:
- General Gain: -53 to 0dB
- Channel Gain: -33 to +9dB
Frequency Cut:
- Cut-Off Frequency: 20Hz - 20KHz
- Type of Cuts: Linkwitz-Riley / Butterworth / Bessel
- Attenuations: 6/12/18/24/36/48 dB/8 degrees
Input Equalizer (EQ in):
- Equalization Band: 31 Bands
- Gain: -12 to +12dB
Channel Equalizer (EQ Channel):
- Equalization bands: 8 parameter per channel
- Gain: -12 to +12 dB
- Q Factor: 0.6 - 9.9
Time Alignment (delay):
- Time: 0 to 18.95 ms
- Distance: 0 to 6500mm
Limiter:
- Threshold: -53 to +6dB
- Attack: 1 to 200ms
- Release: 1 to 988ms
Polarity Inversion (Polarity):
- Inversion: 0 or 180 Degrees
Memory (Preset):
- Memories: 3-100% Configurable
The default password for the DSP is 000000 - to set a new password, just enter any password other than 000000. If you forget your own password, press and hold the reset button for 15 seconds to reset the device to factory settings. (This will also reset all of your settings saved in the app.)